How to attach the stand
•Unplug the AC cord from the AC INPUT terminal.
• Before beginning this process, assure that TV is laid ona clean, safe, and cushioned space to avoid any damage to the unit.
• Do not touch or press the LCD screen, the glass might break under pressure.
Place the TV on its front onto a table.
Align the stand's bottom-plate (supplied) as seen here.
Itwill fit in only one direction.
Hold the unit and attach the stand slowly.
Finally secure the bottom-plate with 3 screws(S J2824-87 ST4x 16C)(supplied).
• Be sure to follow the instructions. Insufficient tightening or incorrect installation of the stand will not support your unit correctly, and
could result in damage or injury from tip-over.
How to remove the stand
When you transport this product, remove the stand and pack flat against the back of the unit in the carton. To remove the stand, perform
these steps in reverse order.
For wall mounting, the base must be removed. To disconnect the base/stand remove the 3 screws from the back.
/
/
/
/
/
3 screws, _,
S S
J J
\
,\ /
_ J
_ J