Hitachi SH-G1000 manual Initial Setup

Models: SH-G1000

1 264
Download 264 pages 36.18 Kb
Page 53
Image 53

Initial Setup

When the device is switched on for the first time after purchase or after the device is initialized, the following screen appears. Perform initial setup procedures according to the on-screen instructions.

1.Tap anywhere on the screen.

2.The Align screen appears for touch screen alignment.

Tap the center of the cross marker. Each time you tap the center of the marker, the marker moves. When the center of the marker is tapped five times, the alignment is completed and the Stylus screen appears.

3.Read the descriptions of the methods for using the stylus, then tap Next. The screen for practicing pop-up menu operations appears.

4.Following the instructions, open a pop-up menu and perform cut-and-paste operations. After finishing the paste operation, tap Next. The Location screen appears.

5.Specify a location on the Location screen.

Tapping (shown to the right of the Time zone box) causes a list to be displayed. As necessary, change the time zone where the device is to be used and then tap Next. The Complete screen appears.

6.Tap the Complete screen. The Today screen appears and the device is ready for use.

Section 2: Understanding Your Device

2A: Your PCS Phone – The Basics 45

Page 53
Image 53
Hitachi SH-G1000 manual Initial Setup