Hitachi SJ2002 manual Group Main Profile Parameters, Group Standard Functions

Parameter tables for user-settable functions follow these conventions:

•Some parameters have 2nd motor equivalents, indicated by the x2xx parameter codes in the left-most column.

•Some parameters specify an option code. Where applicable, the options codes will be in a bulleted list in the Name/Description column.

•The default values apply to all models unless otherwise noted for each parameter... –FE(F) (Europe) / – FU (U.S.)

•Some parameters cannot be edited during Run Mode, and certain Software Lock settings (B031) can prohibit all edits. If in doubt, place the inverter in Stop Mode or consult the inverter manual for details.

“F” Group: Main Profile Parameters

Func.		Name / Description	Default	Set
Code			Value	Value
F001	Output frequency setting		0.0
F002	Acceleration (1) time setting		10.0
F202	Acceleration (1) time setting, 2nd motor		10.0
F003	Deceleration (1) time setting		10.0
F203	Deceleration (1) time setting, 2nd motor		10.0
F004	Keypad Run key routing		00
	• 00 Forward	• 01 Reverse

“A” Group: Standard Functions

Func.		Default	Set
	Name / Description	Value
Code			Value
		–FE(F)/–FU
A001/	Frequency source setting	01 / 00
A201	• 00 Keypad potentiometer
	• 01 Control terminal
	• 02 Function F001 setting
	• 03 ModBus network input
	• 10 Calculate function input
A002/	Run command source setting	01 / 02
A202	• 01 Input terminal FW or RV (assignable)
	• 02 Run key on keypad, or digital operator
	• 03 ModBus network input

18