Hitachi V-21W operating instructions Facility names and functions

Facility names and functions

32Video output connector (BNC)

Composite video signal output (1 Vp-p/75Ω).

33Monitor output connector (BNC)

Video signal output for monitor (1 Vp-p/75Ω). The same character signal as the viewfinder is superimposed on the video signal to allow checking the setting menu from the monitor screen.

34Genlock In connector (BNC)

Reference signal input for applying genlock to the camera.

35Remote control connector (4 pin)

Connection for RC-Z1, RC-Z11, RC-Z2A ,or RC-Z21A camera remote control panel or a personal computer.

36Microphone connector (XLR, 3P)

Connection for separately sold microphone. Microphone power is supplied from this connector.

37Lens connector (12 pin) Connection for lens cable.

38CCU/VTR connector (28 pin for CA-Z31, 26 pin

for CA-Z32) Use separately sold cable to connect a portable VTR or RU-Z1/RU-Z2/camera base station.

39Lighting shoe screw hole (1/4-inch 20UNC)

40Accessory shoe

A small spotlight can be attached without the light striking the lens, viewfinder or microphone.

415-inch viewfinder attachment

The GM-51 5-inch viewfinder can be attached by using the AT-30 adapter.

42Mic holder screw hole

A separately sold MH-Z3 mic holder can be attached.

10