Hitachi V-21W operating instructions Knee/clip sub-menu, White shading sub-menu, Flare sub-menu

Function menu screen

4-4 Knee/clip sub-menu

KNEE POINT		－128⇔	0		⇔＋127			Sets the level where knee function begins operating.
KNEE SLOPE		－128⇔0⇔		+10		⇔＋127		Sets knee response slope.
WHITE CLIP		－128⇔0⇔		+32		⇔＋127		Sets the white clip level.
INITIALIZE								Simultaneously press the		buttons to initialize
								Knee/clip sub-menu items to values shown in rectangles.
4-5 White shading sub-menu
Corrects vertical white shading due to the lens.
EXTENDER		OFF⇔ON					On is indicated when using a lens provided with an extender
							(indication only).
							White shading is set respectively for extender on and off.
AUTO SETUP							Automatic white shading adjustment. Start by adjusting the green
							channel shading with MANU G ADJ.
							Next, adjust the auto white by pushing the			button for 1 second.
							Then, adjust the auto white by pushing the			button for 1 second.
MANU	R ADJ	－128⇔	0		⇔＋127		Use when adjusting white shading manually.
					⇔＋127
	G ADJ	－128⇔	0
	B ADJ	－128⇔	0		⇔＋127
INITIALIZE							Simultaneously press the		buttons to initialize White
							Shading sub-menu items to values shown in rectangles.
4-6 Flare sub-menu
R FLARE		－128⇔	0		⇔＋127		Adjust red signal flare correction.
G FLARE		－128⇔	0		⇔＋127		Adjust green signal flare correction.
					⇔＋127
B FLARE		－128⇔	0				Adjust blue signal flare correction.
INITIALIZE							Simultaneously press the		buttons to initialize Flare sub-
							menu items to values shown in rectangles.

63