Hitachi V-21W operating instructions Scene file, Setting steps

Scene file

When taking scenes having different conditions, the settings need to be optimized for each scene. The scene file function enables setting the conditions for each scene beforehand and storing them in memory for instant recall at the required time. The 4 scene files can be used for storing 4 sets of scene conditions.

File storage items

Type	Item	Details
	CONTRAST	OFF, NORM,
		HIGH
	AUTO IRIS	AVERAGE, PEAK
	GAIN LOW	-3,0dB
2a	GAIN MID	+6,+9,+12dB
	GAIN HIGH	+12,+18,+24dB
	MASKING	OFF, PRESET,
		MEMORY
	GAMMA	OFF, PRESET,
		MEMORY
	DTL LEVEL	OFF,-128,....+127
	DTL FREQ	SOFT,
		STANDARD,
		SHARP
	FLESH TONE GAIN	-128,....+127
	FLESH TONE PHASE	-128,....+127
	FLESH TONE WIDTH	-128,....+127
2b	White balance data	(Remote mode)
	(each filter)
2c	SHUTTER SELECT	1/100,1/250,...
		Var, AES, CC FRM

Setting steps

1.Select the file number with the Scene File switch

(adjust camera to the status previously stored in the memory).

2.Set the file storage items

(if changing the memory contents).

a．Set the Function 1 page items from the setting menu. (See page 45.)

b．Operate auto white balance and store the adjustment in memory (one memory is provided for each of the 4 filters).

(See page 39.)

c．Set the shutter and store the setting in memory. (See page 41.)

Note) Data are stored in the selected file simultaneously with setting.

FUNCTION 1	SCENE 1
CONTRAST	:OFF
AUTO IRIS	:AVERAGE
GAIN LOW	:0dB
MID	:9dB
HIGH	:18dB
DTL	:->
MASKING	:PRESET
GAMMA	:PRESET
INITIALIZE

DTL	SCENE 1
DTL LEVEL	:0
DTL FREQ	:STANDARD
FLESH TONE
LEVEL	:-128
AUTO SETUP:
PHASE	:97
WIDTH	:0

42