Hitachi V-21W operating instructions Power supply, Voltage down display, EXT CCU/VTR Batt

Power supply

When the CA-Z31/CA-Z32 is installed, power can be supplied as follows. Set the Power Select switch accordingly.

1.Connect the separately sold AP-60 AC adapter to the DC IN connector.

2.Connect the camera base station or VTR to the CCU/VTR connector.

3.Connect Anton-Bauer battery.

（Note）

●When a Betacam type VTR is directly connected to the camera, power is supplied from the VTR.

Caution

1.The DC IN connector can accept 10.5 to 17 VDC. However, use a designated power supply of 12 to 13 VDC. Voltage exceeding 17 VDC can cause damage.

2.In not using the equipment for an extended period of time, set the AC adapter switch to off. If a battery is connected, remove the battery.

Voltage down display

As the voltage declines, B lights in the viewfinder. The System sub-menu of the Special Set menu sets the battery type.

Alarm Set adjusts the voltage at which B lights.

Battery type	Alarm operating voltage
12.0V	1O.5V～11.6V
13.5V	11.7V～12.8V
14.4V	12.9V～14.0V

Power Select switch positions

Power supply Setting position

1EXT

2EXT

3CCU/VTR

4BATT

SYSTEM

VF DTL CONT :MENU

VIDEO(VTR) :COMP

AUDIO LEVEL :-60dB

CLOSE LIMIT :

IRIS SPEED :0

REMOTE :9600BPS

BATT TYPE :12V

ALARM SET :11.5V

27