Hitachi V-21W operating instructions Auto setting with RU-Z2A / RU-Z1A plug & plays, Rgb

Studio system operation

Auto setting with RU-Z2A / RU-Z1A (plug & play)s

No	System	Baud rate	Audio level	Video output		Battery type
1	RU-Z1	62.5K(＊1)	-20db(＊1)	RGB		12.0V(＊1)
				COMP		(＊3)
2	RU-Z2	9600(＊1)		YC,	(＊2)
				VBS
	Self-contained	62.5K,	AUTO(＊4)	AUTO(＊4)		12.0V
	inner module operation	9600				13.2V
	M-Z3B					14.4V
	(Betacam)
3	M-Z3P
	(DVCPRO)
	IM-Z3S
	(BetaPRO)
	IM-Z3J
	(Digital-S)
	Self-contained	62.5K	-60dB	COMP
4	Camera adapter operation	9600	-20dB	YC,
	CA-Z31/32			VBS,
	(portable VTR)			RGB

Notes:

1.When RU-Z1/Z2 (RC-Z1/Z2A) remote control is off, although settings can be changed at the camera head full menu, the I nitial settings are returned at resupply of power.

2.When RU-Z1/Z2 (RC-Z1/Z2A) remote control is off, settings can be changed at the camera head full menu. Settings are stored as common setting values in the RU-Z1/Z2 (RC-Z1/Z2A) memory.

3.With RU-Z1/Z2A, Alarm Set is fixed at 11.0 V.

4.When Auto is indicated, settings are automatic at the inner module.

RU-Z2(RU-Z1)RGB connector signal output

The signals indicated in the table can be selected for output from the RU-Z2(RU-Z1)RGB connector.

1.Set the RC-Z2A / Z21A(RC-Z1 / Z11) remote control switch to off. Control shifts from the RC to the camera.

2.Select the SYSTEM sub-menu from the Function menu, then select the output signal at the VIDEO <VTR> item.

Note: When the RBG connector output is other than RGB, the RU-Z2 waveform monitor (WFM

OUT) display does not operate correctly.

connector			Output signal
	RGB	Component		Y / C	VBS
R	R		R-Y	C	－
G	G		Y	Y	VBS
B	B		B-Y	－	－
	SYSTEM
	ASPECT		:16:9
	VF DTL CONT :MENU
	VIDEO(VTR)		:COMP
	AUDIO LEVEL :-60dB
	CLOSE LIMIT :
	IRIS SPEED		:0
	REMOTE		:9600BPS
	BATT TYPE		:12V
	ALARM SET		:11.5V

69