Connecting to Video Equipment
(such as a Laser Disc player, a DVD player, a DSS,or a Video Camera)
■ Read SAFETY GUIDELINES ( I to VII ) carefully to ensure maximum safety before proceeding to these steps:
1)Choose an appropriate site and install the product on a level table where the stand is secure.
•Install the monitor to have ready access to a power socket available.
2)Make sure that the video equipment’s power switch is off.
3)Interconnect the signal input terminal on the monitor rear panel and the video equipment’s signal output terminal to each other using an commercially available video cable.
4)Insert one end of the power cable included into the
5)Turn on the monitor, then the video equipment’s to make sure that a display image appears on the monitor screen.
•For instructions on turning on the monitor and adjusting its display images, see “Operating Instructions” ( 9 to 19 ).
Monitor rear panel
ENGLISH
Speaker | Video equipmen t |
| (such as a video disc pla y er, |
| a DVD play er, and a video camer ) |
| Power |
|
| cable |
|
| Power cable |
|
| connector |
|
| AUDIO IN |
|
SPEAKER |
| VIDEO2 |
TERMINAL |
|
|
(8Ω8W) | White | COMPONENT IN |
| ||
| (W) |
|
To S vide o output terminals
VIDEO1
COMPOSITE IN
To component output terminals | To audio output |
+ - | - + |
|
R | L | (R) |
| To audio input terminals | To audio/ video inpu t terminals |
B
(V)
To component input terminals
To S video inpu t
Use if the video equipment has an
S video input termina l
•If video equipment with an S video output terminal is used, cabling by the S video cable is recommended to provide finer video quality. (If an S video input terminal and a video input terminal connect to the monitor at the same time, S video input would govern.)
•If video equipment is equipped with component video output (Y, PB, PR or Y, CB, CR), please connect to the corresponding color (Y, PB, PR) input jack on the component input of the monitor.
NOTE : Y to Y,
7
