ENGLISH
OPERATING INSTRUCTIONS (continued)
Input Selection
■Press the RGB/VIDEO button on the remote controller or the INPUT SELECT button on the main unit to switch the input in the sequence of RGB1
VIDEO1 | Remote | RGB1 | |||
| controller | ||||
• When the same signal is input to RGB1 and | RGB/ |
|
|
| |
VIDEO | RGB2 | (BNC input) | |||
| |||||
RGB2, the phase may in some cases shift |
| ||||
|
|
|
| ||
slightly but this is not a malfunction. In such | Main unit | VIDEO1 | (composite or S input) | ||
case, readjust the PHASE of the one being | |||||
INPUT |
|
|
| ||
|
|
| |||
used. | SELECT | VIDEO2 | (COMPONENT input) | ||
| |||||
|
|
Volume Adjustment
■While the
remote controller VOLUME button or (or the main unit VOLUME button ▲ or ▼ to adjust the sound volume.
• The adjustment status will be displayed as guidance while you press these buttons.
• While the guidance is on display, press or ▲ to turn up the volume.
• While the guidance is on display, press
or ▼ to turn down the volume. | Main unit |
VOLUME |
•You can also adjust the sound volume setting via the
14 .
•The sound volume adjustment mode will exit when no keys adjustment status guidance will disappear automatically.)
Sound volume setting
VOLUME : 30
Adjustment status guidance
are entered for 5 seconds. (The
Sound Mute
■Press the remote controller MUTE button to mute the sound temporarily.
•When you press the button, [MUTE] (pink) and the status of volume setting will be displayed in a guidance image.
•While the sound is muted, press the button to turn down the volume.
•While the sound is muted, press the button to cancel the mute.
•You can also adjust the sound volume setting of the mute via the
14 .
Sound volume setting
Remote
controller
MUTE
MUTE | : 30 |
|
|
|
|
(The display will turn to pink.)
■Press the remote controller MUTE button once again and the mute will be canceled and the guidance will change to VOLUME (blue), enabling the volume to be heard.
•When MUTE is used, the guide display will continue for 5 sec. and then turn off.
10