Manuals / Hobart / Kitchen Appliance / Convection Oven

Hobart HEC5X ML-126753, HEC5D ML-126751, HEC5 ML-126750 manual Maintenance, Replacing Lamps, Service

Models: DEC5 ML-126749 HEC5 ML-126750 DEC5 ML-126749, HEC5 ML-126750, HEC5D ML-126751, HEC5X ML-126753, HEC5DX ML-126754 HEC5X ML-126753 HEC5D ML-126751

1 16

Download 16 pages 33.94 Kb

Page 16

Image 16

MAINTENANCE

WARNING: THE OVEN AND ITS PARTS ARE HOT. USE CARE WHEN OPERATING, CLEANING, OR PERFORMING ANY MAINTENANCE.

WARNING: DISCONNECT ELECTRICAL SUPPLY AND PLACE A TAG AT THE DISCONNECT SWITCH TO INDICATING THAT YOU ARE WORKING ON THE OVEN BEFORE PERFORMING ANY MAINTENANCE.

The fan motor comes with sealed bearings and requires no lubrication.

Annually check the vent, when cool, to be sure it is free of obstructions.

REPLACING LAMPS

1.Allow oven to cool.

2.Remove all racks by pulling forward, lifting up and out.

3.Unscrew glass dome(s) from light body.

4.Replace the bulb(s).

5.Reassemble glass dome(s) and racks by reversing the disassembly procedure.

SERVICE

Contact your local Hobart-authorized service office for any repairs or adjustments needed on this equipment. Long-term service contracts are available on this and other Hobart products.

FORM 34492 Rev. A (Jan. 2002)

– 16 –

PRINTED IN U.S.A.

Page 16

Image 16

Hobart HEC5X ML-126753, HEC5D ML-126751, HEC5 ML-126750, DEC5 ML-126749 manual Maintenance, Replacing Lamps, Service

Contents

N S TRUCT I ONS DEC & HEC SERIESELECTRIC CONVECTION OVENS MODEL DEC5 ML-126749 HEC5 ML-126750 HEC5D ML-126751 HEC5X ML-126753TABLE OF CONTENTS Installation, Operation and Care of DEC & HEC SERIES ELECTRIC CONVECTION OVENSGENERAL SAVE THESE INSTRUCTIONSINSTALLATION INSTALLATION CODES AND STANDARDSINSTALLING BASIC OVEN UNPACKINGASSEMBLING THE STAND TO THE OVEN ELECTRICAL CONNECTIONSELECTRICAL DATA BACK FRONTASSEMBLING STACKED OVENS STACKING FLUEELECTRICAL CONNECTIONS Stacked Ovens OPERATION CONTROLS - MODELS DEC5/HEC5/HEC5XUSING MODELS HEC5/HEC5X Preheating BEFORE FIRST USE All ModelsCooking End of DayCONTROLS - MODELS HEC5D/HEC5DX MANUALLY SETTING THE TEMPERATURE AND COOK TIME To Set the Temperature 4. The control retains the manual settings for Temperature and TimeTo Change the Time Setting for any Menu Item To Set the Cook TimeAlways Set the Temperature Before Setting the Time To Display the Actual Oven TemperatureStarting a Timed Cycle On All Racks To End a Cooking CycleSETTING THE OVEN FOR COOK & HOLD 3. The HOLD Temperature is preset by the computer control at 150F 66CCOOK & HOLD OPERATION - Models HEC5D and HEC5DX PROPER UTENSILSCOOKING GUIDELINES HOLDING FEATURE COOKING GUIDELINESSTANDARD COOKING TIME CHART POWER OUTAGECLEANING Optional Stainless Steel Oven InteriorSERVICE MAINTENANCEREPLACING LAMPS