Manuals / Hobart / Kitchen Appliance / Convection Oven

Hobart HGC40D & HGC60D, DGC1 manual Maintenance, Replacing Lamps

Models: DGC1 HGC40D & HGC60D HGC60 HGC40

1 24

Download 24 pages 11.9 Kb

Page 22

Image 22

MAINTENANCE

WARNING: TURN OVEN OFF AND UNPLUG ELECTRICAL CORD BEFORE PERFORMING ANY MAINTENANCE.

The fan motor comes with sealed bearings and requires no lubrication.

The door mechanism requires occasional lubrication with mineral oil.

If this oven is placed on casters, it should be connected to the supply piping with the proper disconnect device and restraint. If it is necessary to disconnect the restraint, first turn off the gas supply. Reconnect the restraint before turning the gas supply on and returning the oven to its original installation position.

Annually check the flue, when cool, to be sure it is free of obstructions.

REPLACING LAMPS

•Remove all racks by pulling forward, lifting up and out.

•Remove the right rack support by lifting up.

•Unscrew glass dome(s) from light body.

•Replace the bulb(s).

•Reassemble glass dome(s), rack support and racks by reversing the disassembly procedure.

– 22 –

Page 22

Image 22

Hobart HGC40D & HGC60D, DGC1 manual Maintenance, Replacing Lamps

Contents

HGC60D ML-114732 DGC1, HGC40, HGC60 HGC40D & HGC60D GAS CONVECTION OVENSMODELS DGC1 ML-43853 HGC40 ML-43856 HGC40D ML-43859 HGC60 ML-114731 FORM 19240 Rev. DIMPORTANT FOR YOUR SAFETY FOR YOUR SAFETYTABLE OF CONTENTS DGC1, HGC40 & HGC40D GAS CONVECTION OVENS Installation, Operation and Care ofINSTALLATION SAVE THESE INSTRUCTIONS FOR FUTURE USE GENERALLEVELING INSTALLATION CODES AND STANDARDSINSTALLING BASIC OVEN In the United StatesASSEMBLING THE CHIMNEY AND FLUE EXTENSION ASSEMBLING THE LEGS TO THE OVENASSEMBLING STACKED OVENS ASSEMBLING THE OVEN TO THE STAND GAS AND ELECTRICAL DATA TESTING THE GAS SUPPLY SYSTEMELECTRICAL CONNECTIONS GAS CONNECTIONSFLUE CONNECTIONS BURNER AIR SHUTTER ADJUSTMENTSGas Pressures and Orifices BEFORE FIRST USEOPERATION CONTROLS - MODELS DGC1 & HGC40/HGC60 FigCooking USING THE DGC1 AND HGC40/HGC60 OVENS PreheatingLIGHTING THE DGC1 AND HGC40/HGC60 OVENS End of DayTHERMOSTAT CONTROL Temperature Display When Not Timing ProductTemperature Display When Timing Product CONTROLS - MODEL HGC40D/HGC60D FigCook Button Light If On - While Not Timing Product Temperature Knob When Not Timing ProductTemperature Knob When Timing Product Cook Button Light If On - While Timing ProductThermometer Button TIMER CONTROL Time Display While Not Timing ProductTimer Knob Heat LightHold Button Pulse ButtonStop/Start Button Hold Button LightON / OFF / COOLDOWN SWITCH TWO-SPEED FAN SWITCHLIGHT SWITCH USING THE HGC40D/HGC60D OVEN PreheatingCooking ERROR MESSAGES - HGC40D/HGC60D OVENEnd of Day 300ºF COOK AND HOLD DIAGRAM - Time vs. TemperatureCOOK AND HOLD OPERATION 200ºFCONSERVING ENERGY CLEANINGPROPER UTENSILS OPERATING HINTSProduct COOKING CHARTS Models DGC1, HGC40/HGC40D and HGC60/HGC60DBAKED PRODUCTS TempsProduct MEAT & FISH PRODUCTSMISCELLANEOUS PRODUCTS TempsMAINTENANCE REPLACING LAMPSTROUBLESHOOTING FORM 19240 Rev. D PRINTED IN U.S.A