SAMPLING LINE CONNECTION

NOTE: A product water sampling line must be installed on the feed line between the outlet connection tee of the RO filtration system and the connected cooking equipment for water sampling purposes.

1.Determine a location in the feed line to install the Tee and sampling shut-off valve. The shut-off valve should be easily accessible.

A.Install the 3/8" x 1/4" tee in the feed line after the outlet connection tee and before the connected cooking equipment.

2.Connect the required amount of 1/4" tubing between 3/8" x 1/4" Tee and 1/4" shut-off valve.

3.Connect an additional length of 1/4" tubing to the output side of the shut-off valve for sample water collection.

4.Turn shut-off valve to the off position.

ELECTRICAL REQUIREMENTS

The RO-150 comes with a 110V/60Hz, 24V two amp transformer.

-8-