2 | 3 | 4 |
| ||
|
| |
|
| Head |
1 |
| Tube |
|
|
7/16 in
5/8 in
Remove nozzle, contact tip, and adapter.
Blow out gun casing.
Cut off wire and disconnect gun from feeder.
Lay gun cable out straight before installing new liner.
! Turn off welding power source/wire feeder.
1Nozzle
2Contact Tip
3Tip Adapter
4Nozzle Adapter
.Wire size stamped on tip − check and match wire size.
Unscrew and remove liner.
3/4 in
(20 mm)
Liner 
Stickout
Tools Needed:
5/8, 7/16 in
Reassemble gun in reverse order from taking it apart.
Install
Liner
.Thread wire according to
welding power source/wire feeder manual.
242
