.A complete Parts List is available at www.MillerWelds.com
5-5. Sequence Of Cutting Operation
! The pilot arc starts immediately when trigger is pressed.
EXAMPLE Of Cutting Operation
Place tip near work.
.Keep tip 1/16 in. from work for max cutting speed and tip life.
Slide trigger lock back.
Press trigger. Pilot arc starts.
After cutting arc
starts, slowly move torch across metal.
Adjust speed so |
| Torch air cooling (postflow) | |
Pause briefly at | continues after releasing trigger. | ||
sparks go thru metal |
| ||
end of cut before | . Postflow must finish before | ||
and out bottom of cut. | |||
releasing trigger. | |||
| trigger will restart pilot arc. | ||
|
|
804
