.A complete Parts List is available at www.MillerWelds.com
6-2. Checking Or Replacing Filter Element
! Turn power Off, and disconnect input power plug from receptacle. Check to see that all diagnostic LED’s have stopped flashing before removing wrapper from unit.
Turn power Off, and disconnect input power plug from receptacle.
Remove wrapper from unit.
1 Filter Base
2 Filter
3 Filter Cup
Unscrew filter cup from base.
Remove cup.
Unscrew filter element from base.
Check filter element for dirt and moisture, and replace if necessary.
Be sure that all parts are clean and dry.
Reinstall filter element, and secure filter cup.
Reinstall wrapper.
1
2
3
Tools Needed:
5/16 in.
244
