7-4. Servicing Fuel System

4

5

Valve Closed

3

1

2

YStop engine and let cool.

1Fuel Filter

2Petcock

3Bleeder Valve

4Fuel Shutoff Valve

5Fuel Line

6Sludge Drain Plug

To drain water from fuel system:

Open filter petcock and drain water into metal container. Close petcock when water-free fuel flows.

To replace fuel filter:

Close shutoff valve and turn filter counterclockwise. Remove filter.

Apply thin coat of fuel to gasket on new filter. Install new filter and turn clockwise. Open shutoff valve. Bleed air from fuel system accord- ing to engine manual.

Inspect fuel line, and replace if cracked or worn.

To drain sludge:

Put metal container under drain, and remove sludge drain plug. Re- install plug when done.

YAfter servicing, start engine and check for fuel leaks.

YStop engine, tighten connec- tions as necessary, and wipe up spilled fuel.

Close doors.

6

Tools Needed:

3/8 in

Ref. ST-154 952-C / Ref. ST-154 954 / ST-155 872-A / Ref. ST-191 898

OM-474 Page 27

Page 31
Image 31
Hobart Welding Products OM-474 manual Servicing Fuel System, Stop engine and let cool, To drain water from fuel system