Hobart Welding Products OM-493 manual Servicing Air Cleaner, Overload Protection, Stop engine

7-3. Servicing Air Cleaner

	Y	Stop engine.
1	Y Do not run engine without air
		cleaner or with dirty element.
	1	Wrapper (Foam Element)

2

Wash wrapper with soap and water solution. Allow wrapper to air dry completely.

Spread 1 tablespoon SAE 30 oil evenly into wrapper. Squeeze out excess oil.

2 Element

Replace element if dirty, oily, or damaged.

aircleaner3 1/97 – ST-156 852 / Ref. ST-192 519-A / S-0759

7-4. Overload Protection

1

Tools Needed:

3/8 in

YStop engine. Disconnect negative (–) battery cable.

1 Fuse F1 (See Parts List)

F1 protects the exciter excitation winding from overload. If F1 opens, there is no/low weld and auxiliary power output.

2 Fuse F6 (See Parts List)

F6 protects the engine wiring sys- tem from overload. If F6 opens, engine will not crank.

Replace any open fuses. Reinstall cover before operating.

.When a fuse opens, it usually

indicates a more serious prob- lem exists. Contact a Factory Authorized Service Agent.

2

Ref. ST-802 213-B / Ref. ST-192 519-A

OM-493 Page 22