OPERATION
STARTING A COLD ENGINE:
3.Move the chain brake to the BRAKE position.
NOTE: Set the chain brake by pushing the chain brake lever/hand guard forward (towards the bar) to the brake position. Refer to “Operation – Operating Chain Brake” for additional information.
4.Set the ignition switch to the RUN (I) position.
5.Fully press and release the PRIMER BULB 7 times.
6.Pull CHOKE lever all the way OUT to full position. The partial throttle position is automatically set when the choke lever is set at full choke.
CHOKE LEVER 
Fig. 14
STARTER
GRIP
Fig. 15
CHOKE |
|
LEVER | Fig. 16 |
|
STARTER
GRIP
Fig. 17
TRIGGER
RELEASE
RUN POSITION
THROTTLE TRIGGER
Fig. 18
UK - Page 15
