Homelite CSP4518, CSP3816 manual Symbols, Name, Explanation, UK - Page

SYMBOLS

Important: Some of the following symbols may be used on your tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and more safely.

SYMBOL	NAME	EXPLANATION
	Safety Alert Symbol	Indicates danger, warning or caution. It means
		attention!!! Your safety is involved.
		Your manual contains special messages to bring
		attention to potential safety concerns and machine
	Read Your Operator’s Manual	damage, as well as helpful operating and servicing
		information. Please read all the information carefully to
		avoid injury and machine damage.
	Eye, Hearing and Head Protection	Wear eye, hearing and head protection when operating
		this equipment.
	SAFE-T-TIP®Nose Guard	The SAFE-T-TIP®nose guard on the guide bar helps
		prevent kick-back.
	No Smoking	No smoking, sparks or open flame when mixing fuel or
		refilling fuel tank.
	Operate with Two Hands	Hold and operate the saw properly with both hands.
	OneHanded	Do not operate the saw using only one hand.
	Carbon Monoxide	Engines produce carbon monoxide which is an odourless,
		deadly poison. Do not operate in an enclosed area.
	Kick-back	Danger – beware of kick-back.
	Bar Nose Contact	Avoid bar nose contact.

		Gloves	Wear non-slip gloves.
	RUN		To stop the engine, move the switch to the “O” STOP
	“O”	Switch	position.
			I = ON to Run
STOP
			O = OFF to Stop
			UK - Page 7