OPERATION
WARNING:
Always turn off engine before refuelling. Never add fuel to a machine with a running or hot engine. Move at least 9 m (30 ft.) from refuelling site before starting the engine. DO NOT SMOKE! Failure to heed this warning can result in possible personal injury.
FUEL AND REFUELLING
HANDLING THE FUEL SAFELY
WARNING:
Check for fuel leaks. If any are found, correct them before using the saw to prevent fire or burn injury.
Always handle fuel with care; it is highly flammable. Always refuel outdoors and do not inhale fuel vapour. Do not let petrol or oil come in contact with skin.
Keep petrol and oil away from the eyes. If petrol or oil comes in contact with the eyes, wash them immediately with clean water. If irritation is still present, see a doctor immediately.
Clean up spilled fuel immediately.
MIXING THE FUEL
This product is powered by a
for petrol.
This engine is certified to operate on unleaded petrol intended for motor vehicle use with an octane rating of 87 ([R + M] / 2) or higher.
Do not use any type of
Use a high quality
Mix 2% oil into the petrol. This is a 50:1 ratio.
Mix the fuel thoroughly and each time before refuelling.
Mix in small quantities. Do not mix quantities larger than usable in a
FILLING THE TANK
Refer to “Specific Safety Rules – Refuelling” earlier in this manual for additional safety information.
1.Clean the surface round fuel cap to prevent contamination.
2.Loosen the fuel cap slowly.
3.Carefully pour the fuel mixture into the tank. Avoid spillage.
See Figure 8.
4.Before replacing the fuel cap, clean and inspect the gasket.
5.Immediately replace the fuel cap and hand tighten. Wipe up any fuel spillage.
NOTE: It is normal for the engine to emit smoke during and after the first use.
1 Litre | + | 20 ml | = | } |
|
2 Litres | + | 40 ml | = | 50:1 | |
3 Litres | + | 60 ml | = | ||
4 Litres | + | 80 ml | = |
| |
5 Litres | + | 100 ml | = |
|
|
UK - Page 12
