OPERATION
STARTING A COLD ENGINE:
3.Move the chain brake to the BRAKE position.
NOTE: Set the chain brake by pushing the chain brake lever/hand guard forward (towards the bar) to the brake position. Refer to “Operation – Operating the Chain Brake” later in this manual for additional information.
4.Set the ignition switch to the RUN (I) position.
5.Fully press and release the PRIMER BULB 7 times.
6.Pull CHOKE lever all the way OUT to full position.
7.Engage trigger release.
While squeezing both the trigger release and throttle trigger, push in the throttle lock button. Release the throttle trigger. This latches the trigger for starting.
CHOKE LEVER
FULL CHOKE
HALF CHOKE
RUN POSITION
Fig. 14
TRIGGER
RELEASE
THROTTLE
LOCK
BUTTON
THROTTLE TRIGGER | Fig. 15 |
STARTER
GRIP
Fig. 16
TRIGGER
RELEASE
THROTTLE TRIGGER | Fig. 17 |
RUN POSITION
Fig. 18
UK - Page 14