Honda Power Equipment EM5000is, EM7000is - page 84

82
ASSEMBLY
Wheel Kit Installation
TORQUE:
AXLE
WHEEL(2)
STAND(2)
LONGER
20mm WASHER (2)
8 16mm FLANGE BOLT (4) 4.0 28mm COTTER PIN (2)
816mm
FLANGEBOLT (4)
IN
INSIDE
17 22 lbf·ft (24 29 N·m , 2.4 3.0 kgf·m)
Install the two stands on the under frame using four 8 16 mm
flange bolts.
Install the axle assembly on the generatorusing f our8 16 mm
flange bolts.
Install the two wheels on the axle shaft using the washers and cotter
pins.
If the wheel kit is not installed, it may be possible for dirt and debris to
be drawn into the generator airintake causing possible generator
damage. Always operate the generator with the wheel kitinstalled.
Do not operate the generator without the wheel kit installed. The
wheel kit provides an air space between the ground and the generator
air intake.
1.
2.
3.
05/04/25 09:48:56 31Z11600_083