28
OPERATION
AC OPERATION
OVERLOADINDICATOR
(RED)
OUTPUTINDICATOR
(GREEN)
PLUG
Most motorized appliances require more than their electrical rating for
startup. When an electric motoris started, the overload indicator (red)
may come on. This is normalif the overload indicator (red) goes off
within 4 seconds. If the overload indicator (red) stays on, consult your
generator dealer.
Start the engine (see page )
and make sure the output
indicator (green) comes on.
Turn on the appliance.
If the generator is overloaded (see page ), or if there is a short circuit
in a connected appliance, the overload indicator (red) willgo ON. The
overload indicator (red) will stay ON, and after about four seconds,
current to the connected appliance(s) will shut off, and the output
indicator (green) willgo OFF. Stop the engine and investigate the
problem.
Determine if the cause is a shortcircuit in a connected appliance or an
overload. Correctthe problem and restart the generator.
Before connecting an appliance to the generator, makesure that it is in
good working order and thatits electrical rating does not exceed that
of the receptacle.
Plug an appliance into the
appropriate receptacle.
1.
2.
3.
29
23
09/02/24 18:04:43 31Z28600_029