70
TECHNICAL & CONSUMER INFORMATION
Problems That May Affect EmissionsReplacement PartsMaintenance
If you are aware of any of the following symptoms, have your engine
inspected and repaired by your authorizedHonda servicing dealer.
Hard starting or stalling after starting.
Rough idle.
Misfiring or backfiring under load.
Afterburning (backfiring).
Black exhaust smoke or high fuel consumption.
Follow the
MAINTENANCE SCHEDULE
on page . Remember that
this schedule is based on the assumption that your machine willbe
used for its designed purpose. Sustained high-load or high-
temperature operation,or use in dusty conditions, will require more
frequent service.
The emission control systems on yournew Honda engine were
designed, built, and certified to conform with applicable emission
regulations. We recommendthe use of Honda Genuine parts
whenever you have maintenance done. These original-design
replacement partsare manufactured to the same standards as the
original parts,so you can be confident of their performance. The use
of replacement parts that are not of the original design and quality
may impair the effectiveness of your emission control system.
A manufacturer of an aftermarket part assumes the responsibility that
the part will not adversely affect emission performance. The
manufacturer or rebuilderof the part must certify that use of the part
will not result in a failure of the engine to comply with emission
regulations.
42
09/02/24 18:09:24 31Z28600_071