27
OPERATION
AC OPERATION
OVERLOAD
INDICATOR
(RED)
OUTPUT
INDICATOR
(GREEN) PLUG
Most motorized appliances require more than their electrical rating for
startup. When an electric motoris started, the overload indicator (red)
may come on. This is normalif the overload indicator (red) goes off
within 4 seconds. If the overload indicator (red)stays on, consult your
generator dealer.
Turn on the appliance.
Start the engine (see page ) and make sure the output indicator
(green) comes on.
Plug in the appliance.
If the generator is overloaded (in excess of 3.0 kVA), if there is a short
circuit in a connected appliance, orif the inverter is overheated,the
overload indicator (red) will come ON. The overload indicator (red)will
stay ON, and after about five seconds, currentto the connected
appliance(s) will shut off, and the output indicator (green) will go OFF.
Stop the engine and investigate the problem.
Before connecting an appliance to the generator, makesure that it is in
good working order and thatits electrical rating does not exceed that
of the generator.
Determine if the cause is a shortcircuit in a connected appliance, an
overload, or an overheatedinverter. Correct the problem and restart
the generator.
1.
2.
3.
22
09/12/15 10:07:28 31ZT7620_028