30
OPERATION
Plug in the appliance following the instruction provided with the
parallel operation cable kit.
Turn on the appliance.
If the generators are overloaded (see page ), or if there is a short
circuit in a connected appliance, the overload indicator(red) will go
ON. The overload indicator (red) will stay ON, and after about four
seconds, current to the connected appliance(s) willshut of f, and the
output indicator (green)will go OFF. Stop the engines and investigate
the problem.
Determine if the cause is a shortcircuit in a connected appliance, an
overload, or an overheatedinverter. Correct the problem and restart
the generator.
4.
3.
32
09/12/15 10:07:52 31ZT7620_031