Parking Brake Lever and Warning Buzzer
This lever is used to set the brake when the lawn tractor is parked.
To apply the parking brake, pull up on the lever. The parking indicator lamp
on the control panel will be ON when the engine switch is ON.
To release the parking brake, pull the lever up slightly and press the set
button, lower the lever while holding in the button.
A warning buzzer will sound if the seated operator moves the shift lever
out of the neutral position while the parking brake is set, and the engine
switch is in the “ON” position. Releasing the parking brake lever will stop
the buzzer.
A delayed engine cutoff is interlinked with the parking brake warning
buzzer. This feature prevents the lawn tractor from being operated while
the parking brake is set. The engine will stop a few seconds after the war-
ning buzzer begins to sound unless the parking brake is released.
(1 Wh en washing the lawn tractor, do not spray water directly into
the warning buzzer holes. PARKING BRAKE LEVER BUTTON PARKING INCjlCATOR LAMP
WAkNlNG BUZZER
16