Uneven mowing;
1. Lawn tractor speed too fast-Shift to lower speed.
2. Grass accumulation -Clean inside deck (see page 77).
inside deck.
3. Dull blade. WReplace blade or see your authorized
Honda lawn tractor dealer.
4. Tires improperly inflated. -Check tire inflation (see page 30).
5. Mower not level. WCheck cutter deck mounting.
See your authorized lawn tractor
dealer.
6. Wrong cutter deck height. -Change to proper height.
7. Chute clogged (if equipped -Empty grass bag and chute.
with optional grass bag).
8. Lawn wet ,Allow to dry before cutting.
9. Cutter deck set too low .-Set cutter deck high.
10. Not overlapping cut enough-See page 43.
to compensate for grass
conditions.
11. Throttle setting too low. -Set to FAST.
Clogged cutter deck discharge chute.
1. Wrong blade. WUse a genuine Honda blade or
equivalent.
2. Deck too low. tRaise deck and adjust deck height
properly.
3. Engine overloaded. +Operate at full throttle. Use lower
speed range. Set cutter deck higher
than desired height for first pass,
then cut to desired height on second
pass.
4. Wet lawn *Mow when lawn is dry.
5. Lawn too tall *Set cutter deck higher than desired
height for first pass, then cut to
desired height on second pass.
6. Low engine rpm *Open throttle fully.
7. Grass bags full *Empty grass bags.
(Optional part).
8. Blades install upside down -Check blade installation (see page
71)
80