Cutter Deck Drive Belt Replacement
m Never attempt to change drive belts while the engine is
running. Remove the engine key from the ignition and disconnect the
spark plug caps to prevent accidental start up.
. . 1. 2.
3.
Wear heavy gloves to protect your hands when replacing belts or when
working with the cutter blades.
If the tractor has been running, the engine, muffler and radiator will be
very hot. Allow them to cool before proceeding.
Lower the cutter deck.
Remove the belt tension adjusting knob from the tensioner arm.
Remove the belt stopper and raise pulley B, and work the belt off pulley
A. Remove the belt from pulley B.
BELT TENSION . ..A
ADJUSTING KNOB
-64se \I UTTER DECK
TENSIONER
ARM BELT STOPPER
4. Remove the belt from the cutter deck driven pulley.
CUTTER DECK
DRIVEN PULLEY
66