ANTI-SCALP ROLLER ADJUSTMENT
The anti-scalp rollers help to pre-
vent the blades from gouging or
“scalping” high spots. The deck is
designed to “float”‘, and it is im-
portant to set the anti-scalp rollers
correctly. The setting depends on
the type of terrain being mowed
and the cut height.
FLAT TERRAIN
For flat terrain, use the lower hole
in the anti-scalp roller shaft. Align
the hole with the hole on the deck
that corresponds to the selected
cutting height as shown.
ANTI-SCALP
SLOPING OR UNEVEN TERRAIN
For sloping or uneven terrain, use
the upper hole in the anti-scalp
roller shaft. Align the hole with the
mounting hole that corresponds to
the selected cutting height as
shown.
NOTE: Use the lower three moun-
ting holes only.
If the cut height is set at 1 inch, move both rear anti-scalp roller shafts to
the upper holes as shown. Tighten the nuts securely.
--ROLLERSHAFT
29