Honeywell 1500 Data Matrix Code Page, Low Density Data Matrix, Off, * On, Low Density Codes On, Low Density Codes On, Data Matrix Code Page, * Low Density Codes Off

mined by information encoded in those bar codes. Once the proper number of codes is reached, the data is output in the order specified in the bar codes. Default = On.

* On

Off

Data Matrix Code Page

Data Matrix Code pages define the mapping of character codes to charac- ters. If the data received does not display with the proper characters, it may be because the bar code being scanned was created using a code page that is different from the one the host program is expecting. If this is the case, scan the bar code below, select the code page with which the bar codes were created (see Code Page Mapping of Printed Bar Codes on page A-6),and scan the value and the Save bar code from the Programming Chart on the inside the back cover of this manual. The data characters should then appear properly.

Data Matrix Code Page

Low Density Data Matrix

If you are reading low density Data Matrix codes (codes with little informa- tion), you can scan the Low Density Codes On bar code below. This setting improves scanner performance when reading these Data Matrix codes.

Default = Low Density Codes Off.

Low Density Codes On

* Low Density Codes Off

6 - 46