Honeywell 1500 UPC-A/EAN-13, with Extended Coupon Code, Coupon GS1 DataBar Output, and, Off, * Off, GS1 Output On, GS1 Output On, * GS1 Output Off, Allow Concatenation

UPC-A/EAN-13with Extended Coupon Code

Use the following codes to enable or disable UPC-A and EAN-13 with Extended Coupon Code. When left on the default setting (Off), the scanner treats Coupon Codes and Extended Coupon Codes as single bar codes.

If you scan the Allow Concatenation code, when the scanner sees the coupon code and the extended coupon code in a single scan, it transmits both as separate symbologies. Otherwise, it transmits the first coupon code it reads.

If you scan the Require Concatenation code, the scanner must see and read the coupon code and extended coupon code in a single read to transmit the data. No data is output unless both codes are read.

Default = Off.

* Off

Allow Concatenation

Require ConcatenationCoupon GS1 DataBar Output

If you scan coupons that have both UPC and GS1 DataBar codes, you may wish to scan and output only the data from the GS1 DataBar code. Scan the GS1 Output On code below to scan and output only the GS1 DataBar code data. Default = GS1 Output Off.

* GS1 Output OffGS1 Output On

6 - 23