Honeywell 1500 Utilities, Show Decoder Revision, Show Software Revision, Show Scan Driver Revision, To Add a Test Code I.D. Prefix to All Symbologies, Show Revision

8

Utilities

To Add a Test Code I.D. Prefix to All Symbologies

This selection allows you to turn on transmission of a Code I.D. before the decoded symbology. (See the Symbology Chart, beginning on page A-1)for the single character code that identifies each symbology.) This action first clears all current prefixes, then programs a Code I.D. prefix for all symbologies. This is a temporary setting that will be removed when the unit is power cycled.

Add Code I.D. Prefix toAll Symbologies (Temporary)Show Decoder Revision

Scan the bar code below to output the decoder revision.

Show Decoder RevisionShow Scan Driver Revision

Scan the bar code below to output the scan driver revision. The scan driver controls image capture.

Show Scan Driver RevisionShow Software Revision

Scan the bar code below to output the current software revision, unit serial num- ber, and other product information for the scanner.

Show Revision

8 - 1