Honeywell 1900, 1902 Code 39 Append, Code 39 Message Length, * No Check Character, Validate and Transmit, Minimum Message Length, Maximum Message Length

When Check Character is set to Validate and Transmit, the scanner only reads Code 39 bar codes printed with a check character, and will transmit this character at the end of the scanned data. Default = No Check Charac- ter.

* No Check Character

Validate, but Don’t TransmitValidate and TransmitCode 39 Message Length

Scan the bar codes below to change the message length. Refer to Message Length Description (page 7-2)for additional information. Minimum and Maximum lengths = 0-48. Minimum Default = 0, Maximum Default = 48.

Minimum Message Length

Maximum Message Length

Code 39 Append

This function allows the scanner to append the data from several Code 39 bar codes together before transmitting them to the host computer. When the scanner encounters a Code 39 bar code with the append trigger char-

7 - 7