Honeywell 1900, 1902 < Default All Code 39 Settings, Code 39 On/Off, Code 39 Check Character, Code 39 Start/Stop Characters, No Check Character, Validate, but Don’t Transmit

Code 39

< Default All Code 39 Settings >

Code 39 On/Off

* On

Off

Code 39 Start/Stop Characters

Start/Stop characters identify the leading and trailing ends of the bar code. You may either transmit, or not transmit Start/Stop characters. Default = Don’t Transmit.

Transmit

* Don’t Transmit

Code 39 Check Character

No Check Character indicates that the scanner reads and transmits bar code data with or without a check character.

When Check Character is set to Validate, but Don’t Transmit, the unit only reads Code 39 bar codes printed with a check character, but will not transmit the check character with the scanned data.

7 - 6