Honeywell 1900, 1902 Save, Window, Window, Window, Left of, Sensor On, Sensor Off, * Sensor On, Centering Window, Bottom of Presentation, Presentation Centering

Scan Presentation Centering On, then scan one of the following bar codes to change the top, bottom, left, or right of the centering window. Then scan the percent you want to shift the centering window using digits on the inside back cover of this manual. Scan Save. Default Presentation

Centering = 40% for Top and Left, 60% for Bottom and Right.

Presentation Centering On

* Presentation Centering OffTop of Presentation CenteringWindowBottom of PresentationCentering WindowLeft ofPresentation Centering

Window

Right of Presentation Centering

Window

In-Stand Sensor Mode

This feature senses when the scanner is removed from the stand and tells it to begin manual triggering. When Sensor On is enabled, the scanner defaults to Streaming Presentation Mode when it is in the stand, and to Manual Trigger Mode when it is removed from the stand. Default = Sensor On.

* Sensor OnSensor Off

Note: If you are taking images (see Imaging Commands beginning on page 8- 1), you must set the In-Stand Sensor to Off.

4 - 11