Honeywell 1900, 1902 Transmit Records to Host, Batch Mode Transmit Delay

Transmit Records to Host

If you are operating in Inventory Batch Mode (see Inventory Batch Mode on page 3-17),you must scan the following bar code to transmit all the stored data to the host system.

Transmit Inventory Records

Batch Mode Transmit Delay

Sometimes when accumulated scans are sent to the host system, the transmission of those scans is too fast for the application to process. To program a transmit delay between accumulated scans, scan one of the following delays. Default = Off.

Note: In most cases, a short (250 ms (milliseconds)) delay is ideal, however, longer delays may be programmed. Contact Technical Support (page 14-3) for additional information.

*Batch Mode Transmit Delay Off (No Delay)

Batch Mode Transmit Delay Short

(250 ms)

Batch Mode Transmit Delay Medium

(500 ms)

Batch Mode Transmit Delay Long

(1000 ms)

Multiple Scanner Operation

Note: Multiple Scanner Operation Mode allows you to link up to 7 scanners to one base or Access Point. You cannot join an 8th scanner until you unlink one of the 7 scanners or take a scanner out of range.

3 - 21