Honeywell 1900, 1902 Low Power, Full Power, Medium Power, Medium Low Power, Reset Scanner and Base/Access Point

Flexible Power Management

If you are experiencing network performance issues, and suspect the scanner is interfering with other devices, you can turn down the power output of the scan- ner. This reduces the range between the scanner and a base or an Access Point as shown in the following illustration:

802.11	1902
LAN	Scanner

R

ed

u

c

e

		r
	e
w
dPo

Fu

ll

Power

Scan one of the bar codes below to set the scanner’s power output to Full Power (100%) [2.5mW, 4dBm], Medium Power (35%) [.875mW, 0dBm], Medium Low Power (5%) [.125mW, -9dBm], or Low Power (1%, .025mW, -16dBm). Default = Full Power.

For the new power setting to take effect, the scanner and the base or Access Point must be reset. See Reset Scanner and Base/Access Point (page 3- 16).

* Full Power

Medium Power

Medium Low Power

Low Power

3 - 15