Honeywell 1900, 1902 MSI Message Length, Validate Type 10/11, but Don’t Transmit

When Check Character is set to Validate Type 10/11, but Don’t Transmit, the unit will only read MSI bar codes printed with the specified type check character(s), but will not transmit the check character(s) with the scanned data.

*Validate Type 10, but Don’t Transmit

Validate Type 10 and Transmit

Validate 2 Type 10 Characters,

but Don’t Transmit

Validate 2 Type 10 Characters

and Transmit

Validate Type 10 then Type 11

Character, but Don’t Transmit

Validate Type 10 then

Type 11 Character and Transmit

Disable MSI Check Characters

MSI Message Length

Scan the bar codes below to change the message length. Refer to Message Length Description (page 7-2)for additional information. Minimum and Maximum lengths = 4-48. Minimum Default = 4, Maximum Default = 48.

Minimum Message Length

Maximum Message Length

7 - 37