When the output sequence is Off, the bar code data is output to the host as the image scanner decodes it. Default = Off.

Note: This selection is unavailable when the Multiple Symbols Selection is turned on.

Required

On/Not Required

*Off

Multiple Symbols

When this programming selection is turned On, it allows you to read multiple symbols with a single pull of the image scanner’s trigger. If you press and hold the trigger, aiming the image scanner at a series of symbols, it reads unique symbols once, beeping (if turned on) for each read. The image scanner attempts to find and decode new symbols as long as the trigger is pulled. When this programming selection is turned Off, the image scanner will only read the symbol closest to the aiming beam. Default = Off.

On

* Off

4 - 20