Honeywell 2020, 4820, 4820i Save, Save, Save, Delay Length, Interfunction Delay, Interfunction Delay, Interfunction Delay, Character to Trigger Delay

Next, scan the Character to Trigger Delay bar code, then the 2-digit hex value for the ASCII character that will trigger the delay Code Page Mapping of Printed Bar Codes on page A-7.

Delay Length

Character to Trigger Delay

To remove this delay, scan the Delay Length bar code, and set the number of steps to 0. Scan the Save bar code using the Programming Chart inside the back cover of this manual.

Interfunction Delay

An interfunction delay of up to 495 milliseconds may be placed between the transmission of each segment of the message string. Scan the Interfunction Delay bar code below, then scan the number of milliseconds and the Save bar code using the Programming Chart inside the back cover of this manual.

	Prefix			Scanned Data					Suffix
STX		1	HT		2	3	4	5	CR	LF

Interfunction Delays

Interfunction Delay

To remove this delay, scan the Interfunction Delay bar code, then set the number of steps to 0. Scan the Save bar code using the Programming Chart inside the back cover of this manual.

5 - 6