Assembling the Battery Charge Sleeve KitAttach Tether

1.Use the phillips screw to connect the metal ring of the coiled tether to the battery charge sleeve.

2.Peel the backing from the metal plate on the coiled tether and affix the metal plate to the back of the 2020 base.

Note: For best adhesion, allow a 24 hour cure time before placing stress on the metal plate.

Remove Battery

Remove the end cap of the image scanner (turn the thumbwheel or use a hex wrench).

Insert Battery into Charge Sleeve

1.Place the squared-off end of the battery into the sleeve and slide it until it stops. The battery contacts should be show- ing through the small rectangular open- ing in the battery sleeve.

2.Press other end of the battery until you feel a click.

14 - 3