Honeywell 2020, 4820, 4820i < Default All Interleaved 2 of 5 Settings, Save, Check Digit, No Check Digit, Validate, but Don’t Transmit

Mapping of Printed Bar Codes on page A-7),and scan the value and the Save bar code from the Programming Chart on the inside the back cover of this man- ual. The data characters should then appear properly.

Code 39 Code Page

Interleaved 2 of 5

< Default All Interleaved 2 of 5 Settings >

Interleaved 2 of 5

* On

Off

Check Digit

No Check Digit indicates that the image scanner reads and transmits bar code data with or without a check digit.

When Check Digit is set to Validate, but Don’t Transmit, the unit only reads Interleaved 2 of 5 bar codes printed with a check digit, but will not transmit the check digit with the scanned data.

7 - 9