Honeywell 2020, 4820, 4820i Wand Emulation, 2020 Host Escape Commands, Action, Command, Wand Emulation Connection

2020 Host Escape Commands

Command	Action
<ESC> a	Double beeps to indicate a successful menu change was
	made.
<ESC> b	Triple beeps to indicate a menu change was unsuccessful.
<ESC> 1	The green LED illuminates for 135 milliseconds followed by a
	pause.
<ESC> 2	The green LED illuminates for 2 seconds followed by a
	pause.
<ESC> 3	The green LED illuminates for 5 seconds followed by a
	pause.
<ESC> 4	Emits a beep at a low pitch.
<ESC> 5	Emits a beep at a medium pitch.
<ESC> 6	Emits a beep at a high pitch.
<ESC> 7	Beeps to indicate a successful decode and communication to
	host.
<ESC> 8	Triple beeps to indicate a decode/communication to host was
	unsuccessful.

Wand EmulationWand Emulation Connection

The Wand Emulation Connection bar codes should be used if you want to change the terminal ID only, without changing any other image scanner set- tings. We recommend using Wand Emulation Plug & Play bar codes to program your image scanner to emulate a wand reader. The Wand Emulation Plug

&Play bar codes change other parameters, in addition to changing the terminal ID. Please refer to Wand Emulation Plug & Play on page 2-2for further infor- mation.

In Wand Emulation mode, the image scanner decodes the bar code then sends data in the same format as a wand scanner. The Code 39 Format converts all symbologies to Code 39.

2 - 20