Honeywell 2020, 4820, 4820i Good Read Delay, User-SpecifiedGood Read Delay

scan the bar code below and then scan a digit (1-9) bar code and the Save bar code on the Programming Chart inside the back cover of this manual. Default = 1.

Number of Beeps/LED Flashes

Good Read Delay

This sets the minimum amount of time before the image scanner can read another bar code. Default = 0 ms (No Delay).

*No Delay

Short Delay (500 ms)

Medium Delay (1,000 ms)

Long Delay (1,500 ms)

User-Specified Good Read Delay

If you want to set your own length for the good read delay, scan the bar code below, then set the delay (from 0-30,000 milliseconds) by scanning digits from the inside back cover, then scanning Save.

User-Specified Good Read Delay

4 - 3