Total Connect Online Help Guide
Settings for QuickTime Player
If you do not already have QuickTime Player installed please download and install it. http://www.apple.com/quicktime/download/
After the installation is completed and the PC has been rebooted, configure the player as follows:
1.Open the player. Typically navigate Start > Programs > QuickTime > QuickTime Player.
2.From the Edit
3.Select the Advanced tab. Then using the Transport Setup
4.Ensure the Transport Protocol is set to HTTP, and the Port ID is set to 80.
5.Click OK, then click Apply. Click OK to close.
– 5 –