Honeywell 504, 500, 18 Forced Set User Level 3 and Above, Atm 1/2/3/4 Zones 512 Only, Purpose

				￿￿		￿￿￿￿
￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿									Atm 1/2/3/4 Zones (512 Only)
									ATM zones are omitted by entering one of the ten ATM codes (user
									188 to user 197). To select this option enter an ATM code followed by
									the ent key. Use the A> key to scroll through the four ATM zone
			￿￿￿						options (ATM1 to ATM4) and select by pressing the ent key. A
				￿￿￿					preprogrammed ATM delay time will expire before omitting all ATM
									zones with the selected ATM zone type. The zones will be omitted for
	!"￿￿
									the duration of the ATM time-out period and the remaining time in
￿￿￿￿￿￿￿￿￿￿￿￿									minutes will be displayed on the initiating keypad. A warning is given
					￿￿￿￿￿￿￿				ten and five minutes before the zones are reinstated. The ATM Time-
		￿			￿				out period can be extended by entering an ATM code and selecting
￿￿￿￿￿￿￿								￿
									1=Reset Access. To manually reinstate ATM zones, enter an ATM
									code and select 2=Abort Access.
Forced Set (User Level 3 and Above)
					"￿￿￿				Purpose
									When enabled, the Forced Set option allows the user to automatically
￿￿￿￿!￿￿￿￿￿￿￿￿￿									omit zones, eligible for omission, which are open when the system setting
									routine is started. Zones omitted in this way remain omitted for one set
									period only. This option is not available on the Galaxy 512.
		￿
									Selecting Forced Set
￿￿￿￿￿￿￿						￿￿￿￿￿
									Access the QUICK MENU. Press key 1 followed by the ent key. The
									display indicates how many zones have been omitted and the number
									of seconds left before setting.
					￿￿
									Non-omittable Zones
￿￿￿￿￿￿							￿￿￿
									Some open zones may not be eligible for omission from the system. In
									this case the display indicates which zones are open and the exit time is
￿￿￿￿￿￿￿￿￿￿￿￿￿￿
									reset. These zones must be closed before setting can continue.

10