Honeywell 128, 500, 504, 18, 512, 60 manual Walk Test User Level 5 and Above

Walk Test (User Level 5 and Above)

				￿		Purpose
						The Walk Test option provides a method of testing the zones to
						ensure that they are operating correctly. There are two options
						available:
						1. All zones can be tested
						2. Selected zones can be tested
￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿
						In both cases the sounder indicates an open zone. The test is recorded
				￿		in the log. Wire-free zones also show the received signal strength as a
						percentage
						Selecting Walk Test
￿￿￿￿￿￿￿￿￿￿￿
						Enter the QUICK MENU. Press the key 6 followed by the ent key. When
				￿￿￿		Walk Test is selected, Test All Zones or Selected Zones displays.
￿￿￿!￿￿￿￿￿￿#￿$￿￿￿"￿
						zones are closed.
						All Zones
￿￿￿￿￿￿￿					￿￿￿￿￿
						Choosing All Zones (press key 1) starts the test immediately. No
						selection is necessary as all valid zones are included in the test. The
						sounder operates whenever a zone is opened and stops when all
						Note:	The Test All Zones option only tests zones which can
	￿￿				￿￿￿
						be omitted from the system.
			￿￿￿
						Selected Zones
						Choosing the Selected Zones option by pressing key 2 displays the first
&￿￿￿￿￿
				'￿&￿￿￿￿￿￿￿			zones.
￿	%￿					zone on the system. Each zone is displayed in turn by using the >A or
				￿￿￿￿￿￿￿￿		<B keys. When the zone to be included in the test is displayed, press the
&￿￿￿￿￿						# key. Other zones can be included in the test in the same manner. When
						all of the required zones have been selected, press the ent key to start
￿		(￿￿
						the Walk Test.
						Note:	The Selected Zones option includes non-omittable
		(				Ending Walk Test
￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿						To abort the walk test option press the esc key, otherwise the walk test
						option remains active for 20 minutes after the last key press.

14