"#$
% 
&'!
!"#######
$%&
Pin Warning
This option determines the number of days notification before the expiry date of any user codes programmed as PIN Change. During the notification period, the user is prompted to enter a new code on entry of the expiring PIN. The default period is 99 days, with a programmable range of 1 – 99. If a user does not assign a new code by the end of the PIN Warning period, then the code is erased on the next unsetting of the system.
Note: The PIN Warning ends on the last day of the month, the PIN expires on the first day of the following month.
Max Users ( Pre V4 Only)
This option is used to assign additional MAX users to the system without allocating PINs, MAX users are only authorised to operate the Access Control functions of the MAX modules.
Enter the Codes option and select 3 = MAX Users. Press the ent key to display the first MAX user number. Each of the users can be displayed using the A> and <B keys, or a specific user can be selected by entering the required user number. When the required code is displayed, press the ent key; to display 1 = MAX Number.
Each MAX card has a unique 10 digit number laser etched onto it. A MAX card is assigned to a user by entering this number in the MAX No option. The number identifies the MAX card to the system and refer- ences it to the user it has been assigned to.
Each MAX Number defaults to 0000000000 (ten zero’s):
1.Press and hold the B key until the zeros are deleted.
2.Enter the unique 10 digit number which is laser etched onto the MAX card.
3.Press the ent key to save the programming and return to the previous menu.
Note: A MAX number can be assigned to a user code that does not have a PIN allocated to it. All other options for this user are valid for the MAX card. It is recommended that MAX numbers should be assigned to users not requiring a PIN at the Max Users menu option.
When a MAX number has been assigned to a MAX user number, a solid box () is displayed on the top line of the MAX user number details screen.
24
